Hired-hand Light Traps: Installing Continuous Light Trap Manuel d'utilisateur télécharger pdf

Hired-Hand Mfg., Inc. • 1733 County Road 68 • Bremen, Alabama 35033 • Phone 256-287-1000 • Fax 256-287-2000

Sheet Part No. 4801-5501 Rev. 5-08 Page 1 of 6

Tools Required

Power Drill Level 3/8" Driver ¼" Driver 5/16" Driver Step Ladder

Description

These instructions are for a continuous Light Trap installed in a dedicated

wall in a poultry confinement building. These instructions cover mounting

the Light Trap to either a steel framed wall or to a wooden framed wall.

Refer to Figure 1. There are two types of Light Traps: Blackout and

Brownout.

The Blackout and Brownout Light Traps come in two models:

C(Continuous) and CS(Continuous Slanted). These are illustrated in the

next section. The Continuous mounts flush to a wall. The Continuous

Slanted mounts to a wall with a slanted kneewall. The only difference in

these models is the bottom bracket of the Continuous Slanted. The

bottom bracket is adjustable in order to fit a slanted kneewall. See the

next section for the Framing Dimensions for the Light Trap models.

Continuous Light Trap Framing Dimensions

Installing

Continuous

Light Trap

S Warning!

Disconnect All Electrical Power Sources Before Installing Light Trap

Wood Framing

Steel Framing

Wood

Framing

Dim A Dim B Dim C

4 ft Cont. 46" (116.84 cm) 12" (30.48 cm) 61 ½" (156.21 cm)

5 ft Cont. 58" (147.32 cm) 12" (30.48 cm) 73 ½" (186.69 cm)

6 ft Cont. 70" (177.80 cm) 12" (30.48 cm) 85 ½" (217.17 cm)

8 ft Cont. 94" (238.76 cm) 12" (30.48 cm) 109 ½" (278.13 cm)

Slanted

Kneewall

Vertical

Kneewall

Figure 1 – Continuous Light Trap

Bottom Bracket

(Adjustable)

2x4

framing

2x4 framing

Bottom

Bracket

Steel

Framing

Dim A

4 ft Cont. 50" (127.00 cm)

5 ft Cont. 62" (157.48 cm)

6 ft Cont. 70" (187.96 cm)

8 ft Cont. 98" (248.92 cm)

10" ( 25.4cm)

12" (30.5cm)

10" (25.4cm)

Dim A

Dim C

Dim B

1 2 3 4 5 6