Hired-hand Farm Hand Series: Heat Zone Manuel d'utilisateur

Part No. 4801-5129 rev 6/04 Owners Manual Farm Hand Heat Zone Farm Hand Heat Zone 4 Stage Environmental Controller Hired Hand, Inc. 1733 Co Rd 6

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 8 Note: In step 2, it very important to remove electrical power from the circuits connected to the

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 9 9. Wiring Diagrams Power SupplyStage 1Stage 2Stage 3Stage

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 10 9.1 Connecting directly to Farm Manager over the HH.Net

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 11 9.2 Observing the Status LEDs Farm Hand Hea

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 12 9.3 Connecting to an SCS™ over a Local Network Connection

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 13 9.4 Connecting Ignition to an HSI Infrared Brooder NOTE: For information on proper ground

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 14 9.5 Connecting Ignition to a Zone Infrared Brooder NOTE: For additional information on elec

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 15 9.6 Connecting the Temperature Sensors Inset A Farm Hand Heat Zone Controll

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 16 9.7 Connecting AC Power To BreakerTerminal

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 17 10. Program Reference Program Parameters P1 – Temperature Units The zone parameter (P1) sets

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone Table of Contents Table of Contents Section Title Page 1. Ratings

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 18 Error Sensor 1 Sensor 2 Sensor 3Sensor 4Code Description Error Error Error ErrorE1Sensor 1 Error

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 19 11. Temperature vs. Sensor Resistance Table The following chart gives the resistance when measu

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 20 12. Program Parameter Listing 13. Error Code Listing Error Sensor 1 S

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 21 14. Program Data Sheet Use this Data Sheet to record your personal settings for the Farm Hand

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 1 1. Ratings and Specifications • 115 VAC for Model #6607-1596 (HSI model) • 115/230 VAC for Mod

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 2 4. Introduction The Farm Hand Heat Zone Controller is a four stage environ

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 3 Zone 1 Zone 2 Zone 3 Zone 4 (Zona 1) (Zona 2) (Zona 3) (Zona 4) Zone Status Indicators ON AUTOON

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 4 parameter you are viewing. You can easily see “Room Temperature”, “Target Temperature and all fo

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 5 The Heat Zone can also be connected directly a personal computer running the Farm Manager softwar

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 6 6.1.3 Stage Off Points (P5) The Off Point setting is the temperature at which a the ignition to

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 7 7.2 Installation Instructions 1. Unpack system, and check that all components are present. 1 Fa